Aiper Scuba S1
Cordless
- Pools up to 50 ft
- Floor, walls & waterline
- 150–180 min published; mode varies
Free shipping & 30-day trial on every order.
Your bag is empty.
2026 Head-to-Head Comparison
Compare corded cleaning power against battery runtime, filtration, coverage, run cycles and warranty. See why the Dolphin Escape is our pick for an above-ground pool up to 33 ft.
Cordless
Corded · MaxBin™ · HyperBrush™
$959 $659
Why the Escape wins for above-ground pools
Battery-powered cleaners stop for recharging. The Dolphin Escape uses continuous low-voltage power and can begin another cycle after its filter is rinsed.
The Aiper Scuba S1 has no cable in the pool, cleans the waterline and is rated for longer pools. Those are real advantages; the Escape remains our recommendation for its intended above-ground pool.
The Escape plugs into low-voltage power, so it never waits on a battery, and it is sized and priced for above-ground pools instead of asking you to pay for inground coverage you cannot use.
Side by side
| Feature | Scuba S1 | Escape · Our pick |
|---|---|---|
| Power | Cordless battery (requires recharging) | Corded low-voltage — never recharges |
| Pool size | Pools up to 50 ft | Pools up to 33 ft |
| Cleaning coverage | Floor + walls + waterline; claimed shallow-area coverage down to 12 in | Floor & walls |
| Waterline cleaning | Yes | No |
| Filtration | 3.5 L, 180 µm filter basket | Top-load MaxBin™ basket |
| Top-load MaxBin™ | No | Yes |
| Scrubbing brushes | One active PVC roller | 1 HyperBrush™ |
| Suction | 4,200 GPH | 4,000 GPH |
| Navigation | WavePath™ 2 | SmartNav 2.0™ |
| Cycle / runtime | 150–180 min published; mode varies | 1.5-hour cycle — no recharge wait |
| Recharge wait | About 3–4 hours | None — 0 min recharge |
| Scheduling / timer | Yes — battery permitting | Optional weekly-timer power supply |
| App control | Yes | No — controls on the power supply |
| Anti-tangle swivel | No cable | No — 40 ft cable |
| Warranty | 2-year warranty | 2-year Maytronics warranty |
| 30-day in-pool trial | Retailer return policy | Yes when purchased here — no restocking fee |
The Escape advantage
The Escape is the Max-Series™ robot built for above-ground pools: a top-loading MaxBin™, HyperBrush™ active scrubbing, SmartNav 2.0™ and HyperGrip™ tracks, 4,000 GPH of corded suction, and a 1.5-hour cycle that covers the floor and walls of pools up to 33 ft, at a fraction of the price of the inground flagships.

Built for debris
The MaxBin™ lifts straight out of the top of the Escape, holds a full cycle of leaves and grit, and rinses clean in about a minute.
See the MaxBin™
Active scrubbing
The HyperBrush™ spins faster than a standard brush to lift film off vinyl liners and walls without scuffing, with HyperGrip™ tracks for traction.
Explore the Escape
Plans the route
SmartNav 2.0™ scans the pool and plans a path, so a 1.5-hour cycle covers the whole floor and the walls of an above-ground pool.
See how it cleansIn the pool
Six looks at the Dolphin Escape at work: the cycle, the bin, the brushes and the deck time it saves.






In-depth analysis
There is a reason the Dolphin Escape is the robot we recommend first for an above-ground pool up to 33 ft. Against the Aiper Scuba S1, the case is corded power with no recharge wait, the top-loading MaxBin™ and HyperBrush™ scrubbing. This review walks through each point using the published specifications for both robots.
The Escape is the Max-Series™ robot built for above-ground pools: a top-loading MaxBin™, HyperBrush™ active scrubbing, SmartNav 2.0™ and HyperGrip™ tracks, 4,000 GPH of corded suction, and a 1.5-hour cycle that covers the floor and walls of pools up to 33 ft, at a fraction of the price of the inground flagships. The Scuba S1 is the more fully featured robot, and this review says so where it is true. For an above-ground pool up to 33 ft, the Escape remains our value recommendation.
The Aiper Scuba S1 runs on an onboard lithium battery rated for 150–180 min published; mode varies, followed by about 3–4 hours before another full run. Actual runtime and the number of cycles a pool needs vary with the selected mode, debris load and pool conditions; once the pack is empty, another full cycle waits for charging.
The Dolphin Escape removes that recharge wait. Fed by a low-voltage power supply on the deck, it is rated at 4,000 GPH through its 1.5-hour cycle. Lift out the MaxBin™, rinse it, set the robot back in and run again; there is no onboard battery pack whose available runtime can decline with age.

The Escape's MaxBin™ loads from the top, holds a full cycle of leaves and dirt without starving the suction, and rinses clean under a hose in about a minute. When pollen or fine dust is the problem, the optional NanoFilter™ MaxBin™ drops in to trap the particles a standard basket lets through.
The Aiper Scuba S1 relies on 3.5 L, 180 µm filter basket, and its published materials do not confirm a dedicated fine-debris stage as standard equipment. The Escape can accept the optional NanoFilter™ MaxBin™, giving it a documented setup for pollen and silt without overstating an unsupported micron-to-micron comparison.
The HyperBrush™ spins faster than a standard brush and scrubs vinyl liners and above-ground walls without scuffing, while HyperGrip™ tracks keep the Escape moving on slick surfaces. The Aiper Scuba S1 uses one active PVC roller.
Coverage is where the two robots are most clearly built for different pools. The Dolphin Escape cleans the floor and walls on pools up to 33 ft. The Aiper Scuba S1 publishes its coverage as floor + walls + waterline; claimed shallow-area coverage down to 12 in on pools up to 50 ft. SmartNav 2.0™ plans a route across the pool instead of bouncing off the walls, so the 1.5-hour cycle covers the whole floor and climbs the walls on pools up to 33 ft.

The Dolphin Escape is controlled from its power supply, and an optional timer power supply adds weekly scheduling. The Aiper Scuba S1 schedules runs within what its battery allows and offers app control.
The Escape uses a serviceable Maytronics platform. The Dolphin Escape carries a 2-year Maytronics warranty; purchases from this store also include free 1–3 day FedEx shipping and a 30-day in-pool trial with no restocking fee. For the Aiper Scuba S1, the published term is 2 years under its maker's own return policy. Aiper's current official materials conflict on full-cycle runtime and whether the 3 µm MicroMesh™ insert is included or optional. Its specification page remains live, but the exact official store endpoint returns 410 Gone, so current inventory should be confirmed.
Choose the Dolphin Escape for an above-ground pool up to 33 ft: corded power with no recharge wait, the top-loading MaxBin™ and HyperBrush™ scrubbing.
Choose the Aiper Scuba S1 for pool owners who want cordless floor-to-waterline coverage and are comfortable confirming the exact filter bundle before purchase.
Still deciding? See how the Escape stacks up against every other robot on the Dolphin Escape comparison hub, or talk to a Dolphin specialist.
New
$959$659Save $300
Redefine how you clean your pool. With the top-loading MaxBin™, HyperBrush™ scrubbing and SmartNav 2.0™, see why pool owners everywhere love the new 2026 Dolphin Escape. Free shipping, a 30 day trial and no restocking fees.
Save more with Certified Open Box from $649 →
Certified Refurbished from $589 →
Common questions
The Aiper Scuba S1 has the longer spec sheet: cable-free operation, waterline cleaning and a 50 ft pool rating. The Dolphin Escape is the better value for an above-ground pool up to 33 ft, where it runs on corded power with no recharge wait, empties from a top-loading MaxBin™ and scrubs with the HyperBrush™.
The Aiper Scuba S1 is rated for 150–180 min published; mode varies and then needs about 3–4 hours before another full run. The Dolphin Escape plugs into a low-voltage power supply outside the pool, so it never recharges: rinse the MaxBin™ and start another 1.5-hour cycle right away.
The Dolphin Escape uses the top-loading MaxBin™ basket, with an optional NanoFilter™ MaxBin™ for fine debris. The Scuba S1 relies on 3.5 L, 180 µm filter basket and its published materials do not confirm a dedicated fine-debris stage as standard equipment. The optional NanoFilter™ MaxBin™ gives the Escape a documented fine-filtration path when pollen or silt is the problem.
The Dolphin Escape is backed by a 2-year Maytronics warranty. Purchases from this store include free 1–3 day FedEx shipping and a 30-day in-pool trial with no restocking fee. The Aiper Scuba S1 carries a 2-year warranty under its maker's return policy.
Keep comparing
Every pool deserves an intelligent robot.
Take Escape home and try it in your own pool for 30 days.
